# Set up your development environment

Before you begin, set up your infrastructure as described in the [Qualcomm Linux Build Guide](https://docs.qualcomm.com/doc/80-70023-254/topic/introduction.html).

The Linux build guide discusses the common build workflows. To analyze and fix boot issues, use the [Build firmware](https://docs.qualcomm.com/doc/80-70023-254/topic/build_addn_info.html#build-firmware) section in the build guide.

**Related documents:**

This guide provides a detailed description of the booting process. For more information, see the following guides:

- For supported hardware information, see the [Getting Started](https://docs.qualcomm.com/doc/80-70023-253/topic/rb3-qsg-whats-in-box.html) section in Development Kit Quick Start.
- For boot image build instructions, see [Build Boot](https://docs.qualcomm.com/doc/80-70023-254/topic/build_addn_info.html#build-firmware) in the build firmware section of the build guide.
- For instructions about installing the Qualcomm devicetree editor (QDTE), see the [QDTE](https://docs.qualcomm.com/doc/80-70023-4/topic/qdte-tools.html#qdte-tools) documentation.

## Next steps

- [Tools to update boot configuration](https://docs.qualcomm.com/doc/80-70023-4/topic/tools.html#tools)
- [Update the device firmware](https://docs.qualcomm.com/doc/80-70023-4/topic/Update-the-device-firmware.html#update-the-device-firmware)

Last Published: Dec 28, 2025

[Previous Topic
APSS cold boot flow](https://docs.qualcomm.com/bundle/publicresource/80-70023-4/topics/bootloader-architecture.md) [Next Topic
Tools to update boot configuration](https://docs.qualcomm.com/bundle/publicresource/80-70023-4/topics/tools.md)