# Troubleshoot using PBL/XBL log The sample primary boot loader/eXtensible Bootloader (PBL/XBL) log indicates the start and end of the PBL and XBL. For more information about PBL and XBL, see [Boot loader](https://docs.qualcomm.com/doc/80-70030-4/topic/bootloader.html#bootloader). The following table lists log entries that can help you verify the start and end of the boot loaders. PBL/XBL log entries | Log entry | Description | | --- | --- | | `S - Boot Interface: UFS` | Indicates the booting of Qualcomm Linux software images from UFS as the boot image is stored in UFS. | | `S - PBL Patch Ver: 1` | Indicates the start of PBL. | | `S - 69043 - PBL, End` | Indicates the end of PBL. | | `B - 79574 - SBL1, Start` | Indicates the start of XBL. Both SBL1 and XBL refer to the same secondary boot loader. | | `B - 1394338 - SBL1, End` | Indicates the end of XBL. | | `D - 1318210 - SBL1, Delta` | Indicates the time difference in microseconds between start and end of XBL. | Note The numbers in the log entry column of the table show the timestamp in microseconds. The following is a sample log. Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC\_IMAGE\_VERSION\_STRING=BOOT.<XX.x.x.xx-xxxxx-XXXXX-x> S - IMAGE\_VARIANT\_STRING=Soc<XXXXXXX> S - OEM\_IMAGE\_VERSION\_STRING=ip-<xx-xxx-xxx-xx>\*\* S - Boot Interface: UFS\*\* S - Secure Boot: Off S - Boot Config @ 0x00786070 = 0x000000c1 S - JTAG ID @ 0x00786130 = 0x001980e1 S - OEM ID @ 0x00786138 = 0x00000000 S - Serial Number @ 0x00786134 = 0xf744c1e9 S - OEM Config Row 0 @ 0x007841c0 = 0x0000000000000000 S - OEM Config Row 1 @ 0x007841c8 = 0x0000000000000000 S - Feature Config Row 0 @ 0x00784148 = 0x0000000000000000 S - Feature Config Row 1 @ 0x00784150 = 0x0000000000000000 S - Core 0 Frequency, 1516 MHz\*\* S - PBL Patch Ver: 1\*\* D - 6626 - pbl\_apps\_init\_timestamp D - 31574 - bootable\_media\_detect\_timestamp D - 853 - bl\_elf\_metadata\_loading\_timestamp D - 704 - bl\_hash\_seg\_auth\_timestamp D - 6621 - bl\_elf\_loadable\_segment\_loading\_timestamp D - 4638 - bl\_elf\_segs\_hash\_verify\_timestamp D - 17185 - bl\_sec\_hash\_seg\_auth\_timestamp D - 811 - bl\_sec\_segs\_hash\_verify\_timestamp D - 31 - pbl\_populate\_shared\_data\_and\_exit\_timestamp\*\* S - 69043 - PBL, End B - 79574 - SBL1, Start\*\* B - 210297 - SBL1 BUILD @ <XXXXXXX> B - 214445 - usb: usb\_shared\_xbl\_dtb\_node\_init dtb status , 0x3 B - 223717 - usb: HS: device tree Not available , 0x3 B - 224114 - usb: eud\_serial\_upd , 0xf744c1e9 D - 229421 - sbl1\_hw\_init D - 519 - media\_init:1 D - 0 - smss\_load\_cancel B - 239455 - SMSS - Image Load, Start D - 3111 - SMSS - Image Loaded, Delta - (0 Bytes) D - 1037 - Auth Metadata D - 5825 - sbl1\_xblconfig\_init B - 254522 - XBL Config - Image Load, Start B - 258640 - DTB Found: [pre-ddr][7601f201000000][0] D - 4453 - boot\_pre\_ddr\_dtb\_load B - 267851 - UFS Device Tree Settings B - 271206 - UFS Init Speed: HS Enabled 1, Gear 4 2 Lane Rate 2 B - 280874 - UFS Perf Speed: HS Enabled 1, Gear 4 2 Lane Rate 2 B - 287096 - UFS Timeouts(us): fDeviceInit 2500000, UTRD Poll 30000000 D - 45323 - media\_init:2 B - 387868 - UFS INQUIRY ID: SAMSUNG KM2L9001CM-B518 0700 B - 389485 - UFS Boot LUN: 1 B - 400953 - UFS GEAR: 3 D - 95099 - media\_init:3 D - 30 - shrm\_load\_cancel B - 410835 - SHRM - Image Load, Start D - 702 - Auth Metadata D - 1403 - Segments hash check D - 12230 - SHRM - Image Loaded, Delta - (35752 Bytes) D - 0 - boot\_default\_cdt\_init D - 488 - boot\_cdt\_init B - 435540 - CDT - Image Load, Start B - 438407 - CDT Version:3,Platform ID:32,Major ID:1,Minor ID:0,Subtype:2 D - 16928 - sbl1\_hw\_platform\_pre\_ddr D - 0 - devcfg init B - 464942 - PMIC A:2.0 B:1.0 C:2.2 I:1.0 B - 466772 - PM: PM8 0x4 B - 469181 - PM: xVdd reset B - 471835 - PM: PON by SYSOK B - 724497 - PM: SET\_VAL:Skip B - 724527 - PM: Verifying PON-Trigger specific configurations & current PON-Trigger B - 733281 - PM: All PON-Trigger specific configs verified. Proceeding to BOOT B - 742736 - PM: PSI: b0x06\_v0x3c B - 745450 - PM: Device Init # SPMI Transn: 15422 D - 291031 - pm\_device\_init, Delta B - 751154 - pm\_driver\_init, Start B - 762286 - PM: Driver Init # SPMI Transn: 500 D - 7655 - pm\_driver\_init, Delta B - 766983 - PM: CHG Type in CHG init : 0 B - 771375 - PM: Battery ID: 7612Ohm B - 774547 - PM: debug board connected B - 778207 - vsense\_init, Start D - 0 - vsense\_init, Delta D - 339312 - sbl1\_hw\_pre\_ddr\_init D - 0 - boot\_dload\_handle\_forced\_dload\_timeout D - 2928 - sbl1\_load\_ddr\_training\_data B - 803034 - Pre\_DDR\_clock\_init, Start D - 61 - Pre\_DDR\_clock\_init, Delta D - 12902 - sbl1\_ddr\_set\_params B - 814746 - sbl1\_ddr\_init, Start B - 818162 - LP4 DDR detected B - 832772 - eCDT MRR - Data Starting Address: 0x09066D00 D - 15250 - sbl1\_ddr\_init, Delta B - 838445 - DSF version = 262.0.46 B - 841830 - Manufacturer ID = 1, Device Type = 7 B - 845399 - Rank 0 size = 2048 MB, Rank 1 size = 4096 MB B - 850248 - Row Hamming DDR B - 855769 - Row Hammer Check : DRAM supports unlimited MAC Value : MR\_RH[OP2:0 = 0] & MR\_RH[OP3 = 1] for CH0 & CS0 B - 864431 - Row Hammer Check : DRAM supports unlimited MAC Value : MR\_RH[OP2:0 = 0] & MR\_RH[OP3 = 1] for CH0 & CS1 B - 875136 - Row Hammer Check : DRAM supports unlimited MAC Value : MR\_RH[OP2:0 = 0] & MR\_RH[OP3 = 1] for CH1 & CS0 B - 885842 - Row Hammer Check : DRAM supports unlimited MAC Value : MR\_RH[OP2:0 = 0] & MR\_RH[OP3 = 1] for CH1 & CS1 D - 81893 - sbl1\_ddr\_init D - 31 - boot\_pre\_ddi\_entry B - 904325 - do\_ddr\_training, Start B - 945530 - DDR: Start of DDR Training Restore B - 949068 - Current DDR Freq = 1709 MHz B - 950166 - Max enabled DDR Freq = 2092 MHz B - 954192 - DDR: End of DDR Training Restore D - 51057 - do\_ddr\_training, Delta D - 58834 - sbl1\_do\_ddr\_training D - 518 - boot\_ddi\_entry B - 970022 - Pimem init cmd, entry D - 9211 - Pimem init cmd, exit B - 982466 - External heap init, Start B - 985546 - External heap init, End D - 22112 - sbl1\_post\_ddr\_init D - 30 - sbl1\_hw\_init\_secondary B - 996252 - DDR - Image Load, Start B - 1001559 - DTB Found: [post-ddr][7601f201000000][2001010000000000] D - 9486 - boot\_post\_ddr\_dtb\_load D - 762 - boot\_fedl\_check B - 1013789 - APDP - Image Load, Start D - 2959 - APDP - Image Loaded, Delta - (0 Bytes) D - 0 - boot\_dload\_dump\_security\_regions D - 0 - ramdump\_load\_cancel B - 1030137 - RamDump - Image Load, Start D - 3325 - RamDump - Image Loaded, Delta - (0 Bytes) D - 0 - boot\_update\_abnormal\_reset\_status D - 0 - boot\_cache\_set\_memory\_barrier D - 0 - boot\_smem\_debug\_init D - 458 - boot\_smem\_init D - 0 - boot\_smem\_alloc\_for\_minidump D - 61 - boot\_smem\_store\_pon\_status D - 30 - sbl1\_hw\_platform\_smem D - 61 - boot\_ddr\_share\_data\_to\_aop D - 488 - boot\_clock\_init\_rpm D - 0 - boot\_vsense\_copy\_to\_smem D - 0 - boot\_populate\_ram\_partition\_table D - 30 - boot\_populate\_ddr\_details\_shared\_table D - 0 - sbl1\_tlmm\_init D - 0 - sbl1\_efs\_handle\_cookies B - 1092906 - OEM\_MISC - Image Load, Start D - 762 - Auth Metadata D - 274 - Segments hash check D - 10645 - OEM\_MISC - Image Loaded, Delta - (5048 Bytes) B - 1106875 - QTI\_MISC - Image Load, Start D - 5704 - QTI\_MISC - Image Loaded, Delta - (0 Bytes) B - 1122308 - PM: PM Total Mem Allocated: 2340 D - 5520 - sbl1\_pm\_aop\_pre\_init\_wrapper B - 1126883 - AOP - Image Load, Start D - 763 - Auth Metadata D - 1677 - Segments hash check D - 13085 - AOP - Image Loaded, Delta - (200732 Bytes) B - 1143292 - QSEE Dev Config - Image Load, Start D - 854 - Auth Metadata D - 610 - Segments hash check D - 13024 - QSEE Dev Config - Image Loaded, Delta - (53248 Bytes) B - 1165344 - QSEE - Image Load, Start D - 17873 - Auth Metadata D - 21594 - Segments hash check D - 82441 - QSEE - Image Loaded, Delta - (3900768 Bytes) B - 1251811 - DTB: invalid vibration prop value B - 1256722 - DTB: Vibration Enabled D - 10217 - sbl1\_hw\_play\_vibr B - 1264865 - SEC - Image Load, Start D - 3142 - SEC - Image Loaded, Delta - (0 Bytes) B - 1271758 - CPUCPFW - Image Load, Start D - 17598 - Auth Metadata D - 17385 - Segments hash check D - 48007 - CPUCPFW - Image Loaded, Delta - (171180 Bytes) B - 1328793 - QHEE - Image Load, Start D - 17843 - Auth Metadata D - 6954 - Segments hash check D - 27664 - QHEE - Image Loaded, Delta - (1478736 Bytes) B - 1359781 - APPSBL - Image Load, Start D - 671 - Auth Metadata D - 10889 - Segments hash check D - 25315 - APPSBL - Image Loaded, Delta - (2564048 Bytes) D - 0 - sbl1\_save\_appsbl\_index\*\* B - 1394338 - SBL1, End D - 1318210 - SBL1, Delta\*\* Last Published: Jul 20, 2026 [Previous Topic Troubleshoot using sample logs](https://docs.qualcomm.com/bundle/publicresource/80-70030-4/topics/debug.md) [Next Topic UEFI log](https://docs.qualcomm.com/bundle/publicresource/80-70030-4/topics/uefi-log.md)