# Troubleshoot sensors The following resources describe a few common issues and the techniques available to analyze and troubleshoot these issues. Note The `` should be considered as one of the existing paths on the device: `/etc/sensors/registry/registry/` or `/var/cache/sensors/registry/registry/`. ## The `ssc_sensor_info` tool is unable to list sensors This error indicates a failure in parsing the sensor registry, rendering the sensor unavailable for listing using the `ssc_sensor_info` tool. Do the following to resolve this error: > > > Note > > > Verify that the read and write permissions for the files are enabled for User mode, and read only permission is enabled for Group and Others modes. Ensure that the User and Group mode names are `system system`. > > > 1. Ensure that `/etc/sensors/sns_reg_config` and `/etc/sensors/config/json.lst` files are present with the required permissions > as shown in the following example: > > > > > > > > > > root@qcm6490:~# ls -l /etc/sensors/sns_reg_config > > -rw-r--r--. 1 system system 226 Mar 9 2018 /etc/sensors/sns_reg_config > > Copy to clipboard > > > > > > root@qcm6490:~# ls -l /etc/sensors/config/json.lst > > -rw-r--r--. 1 system system 1452 Mar 9 2018 /etc/sensors/config/json.lst > > Copy to clipboard > > > 2. Ensure that `/etc/sensors/config/` directory has the sensor JSON file with the required permissions, as described in the above note. > > > > > > > > > > [root@qcm6490](mailto:root%40qcm6490):/etc/sensors/config# ls -l > > total 548 > > -rw-r–r–. 1 system system 1452 Mar 9 2018 json.lst > > -rw-r–r–. 1 system system 5638 Mar 9 2018 kodiak\_ak991x\_0.json > > -rw-r–r–. 1 system system 2837 Mar 9 2018 kodiak\_bu52053nvx\_0.json > > -rw-r–r–. 1 system system 5480 Mar 9 2018 kodiak\_default\_sensors.json > > -rw-r–r–. 1 system system 293 Mar 9 2018 kodiak\_dynamic\_sensors.json > > -rw-r–r–. 1 system system 392 Mar 9 2018 kodiak\_idp\_ak991x\_0.json > > -rw-r–r–. 1 system system 384 Mar 9 2018 kodiak\_idp\_lsm6dst\_0.json > > -rw-r–r–. 1 system system 384 Mar 9 2018 kodiak\_idp\_lsm6dst\_1.json > > .. > > -rw-r–r–. 1 system system 302 Mar 9 2018 qcm6490\_power\_0.json > > -rw-r–r–. 1 system system 7952 Mar 9 2018 qcm6490\_rbx\_icm4x6xx\_0.json > > -rw-r–r–. 1 system system 5922 Mar 9 2018 qcm6490\_rbx\_navmez\_ak991x\_0.json > > -rw-r–r–. 1 system system 7957 Mar 9 2018 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json > > -rw-r–r–. 1 system system 7957 Mar 9 2018 qcm6490\_rbx\_navmez\_rev2\_icm4x6xx\_0.json > > -rw-r–r–. 1 system system 3688 Mar 9 2018 qcm6490\_rbx\_navmezz\_icp101xx\_0.json > > > 3. Ensure that `` directory is accessible and has the corresponding parsed file, as shown below. > > > > > > > > > > [root@qcm6490](mailto:root%40qcm6490):/var/cache/sensors/registry/registry# ls -l > > total 524 > > -rw-r–r–. 1 system system 3 Jan 1 00:00 DIR > > -rw-r–r–. 1 system system 902 Apr 28 2022 qcm6490\_default\_sensors.json.default\_sensors > > -rw-r–r–. 1 system system 86 Apr 28 2022 qcm6490\_default\_sensors.json.default\_sensors.accel > > -rw-r–r–. 1 system system 133 Apr 28 2022 qcm6490\_default\_sensors.json.default\_sensors.accel.attr\_0 > > -rw-r–r–. 1 system system 90 Apr 28 2022 qcm6490\_default\_sensors.json.default\_sensors.accel\_cal > > .. > > -rw-r–r–. 1 system system 84 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0.temp > > -rw-r–r–. 1 system system 232 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0.temp.config > > -rw-r–r–. 1 system system 346 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform > > -rw-r–r–. 1 system system 95 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.accel > > -rw-r–r–. 1 system system 146 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.accel.fac\_cal > > -rw-r–r–. 1 system system 183 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.accel.fac\_cal.bias > > -rw-r–r–. 1 system system 445 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.accel.fac\_cal.corr\_mat > > -rw-r–r–. 1 system system 863 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.config ## SUID lookup failures This error indicates a custom code failure in retrieving SUID for a specified sensor. Do the following to resolve this error: > > > 1. Run the `ssc_sensor_info` tool to check if the specified sensor is available. > > > > > > > > > > - If the sensor list is empty, see the first debugging method described in [The ssc\_sensor\_info tool is unable to list sensors](https://docs.qualcomm.com/doc/80-70030-7/topic/debug.html#troubleshooting-ssc-sensor-info). > > - If only the specified sensor is unavailable, proceed with the following checks: > > > > > > > > > > > > > > > > > 1. Ensure that the sensor is listed in `/etc/sensors/config/json.lst` file, as shown in the following example: > > > > > > > > > [root@qcm6490](mailto:root%40qcm6490):~# cat /etc/sensors/config/json.lst > > > kodiak\_ak991x\_0.json > > > qcm6490\_default\_sensors.json > > > qcm6490\_power\_0.json > > > qcm6490\_rbx\_icm4x6xx\_0.json > > > qcm6490\_rbx\_navmez\_icm4x6xx\_0.json > > > qcm6490\_rbx\_navmezz\_icp101xx\_0.json > > > qcm6490\_rbx\_navmez\_ak991x\_0.json > > > 2. Verify that the configuration file for the specified sensor is parsed and present in the `parsed_file_list.csv` file, as shown in the following example: > > > > > > > > > [root@qcm6490](mailto:root%40qcm6490):/var/cache/sensors/registry# cat parsed\_file\_list.csv > > > qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.config > > > qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.orient > > > qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.gyro.fac\_cal.corr\_mat > > > qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.gyro.fac\_cal.bias > > > qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.gyro.fac\_cal > > > qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.gyro > > > qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.accel.fac\_cal.corr\_mat > > > qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.accel.fac\_cal.bias > > > qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.accel.fac\_cal > > > qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.accel > > > 3. Verify that the configuration file for the specified sensor is parsed and present in the `` directory as shown in the following example: > > > > > > > > > [root@qcm6490](mailto:root%40qcm6490):/var/cache/sensors/registry/registry# ls -l > > > total 524 > > > -rw-r–r–. 1 system system 248 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0 > > > -rw-r–r–. 1 system system 85 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0.accel > > > -rw-r–r–. 1 system system 233 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0.accel.config > > > -rw-r–r–. 1 system system 88 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0.freefall > > > -rw-r–r–. 1 system system 236 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0.freefall.config > > > -rw-r–r–. 1 system system 84 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0.gyro > > > -rw-r–r–. 1 system system 232 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0.gyro.config > > > -rw-r–r–. 1 system system 82 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0.md > > > -rw-r–r–. 1 system system 230 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0.md.config > > > -rw-r–r–. 1 system system 84 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0.temp > > > -rw-r–r–. 1 system system 232 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0.temp.config > > > -rw-r–r–. 1 system system 346 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform > > > -rw-r–r–. 1 system system 95 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.accel > > > -rw-r–r–. 1 system system 146 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.accel.fac\_cal > > > -rw-r–r–. 1 system system 183 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.accel.fac\_cal.bias > > > -rw-r–r–. 1 system system 445 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.accel.fac\_cal.corr\_mat > > > -rw-r–r–. 1 system system 863 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.config > > > -rw-r–r–. 1 system system 94 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.gyro > > > -rw-r–r–. 1 system system 145 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.gyro.fac\_cal > > > -rw-r–r–. 1 system system 182 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.gyro.fac\_cal.bias > > > -rw-r–r–. 1 system system 444 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.gyro.fac\_cal.corr\_mat > > > -rw-r–r–. 1 system system 91 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.md > > > -rw-r–r–. 1 system system 192 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.md.config > > > -rw-r–r–. 1 system system 174 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.orient > > > -rw-r–r–. 1 system system 536 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.placement > > > -rw-r–r–. 1 system system 94 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.temp > > > -rw-r–r–. 1 system system 142 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.temp.fac\_cal > > > -rw-r–r–. 1 system system 102 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.temp.fac\_cal.bias > > > -rw-r–r–. 1 system system 103 Apr 28 2022 qcm6490\_rbx\_navmez\_icm4x6xx\_0.json.icm4x6xx\_0\_platform.temp.fac\_cal.scale > > > 2. If the preceding validations don’t identify any issues, then there could be an issue with your own app’s custom code implementation that uses the QSH client APIs. Please revisit your code implementation. ## Sensor is listed but unable to receive sensor data This error indicates failure of the sample or custom code, use the following sensor tool to receive events for a specified sensor. > > > Run the following command to stream the specified sensor: > > > > > > > > > `see_workhorse [-sensor=][-sample_rate=] [-batch_period=] [-calibrated=<0 | 1>] [-wakeup=<0 | 1>]` > > > > For example, > > > see_workhorse -sensor=accel -sample_rate=max -duration=30 -display_events=1 > Copy to clipboard If the tool is able to receive the sensor event then there could be an issue with your app’s custom code implementation that uses the QSH client APIs. Please revisit your code implementation. For more information, see [Tools](https://docs.qualcomm.com/doc/80-70030-7/topic/test_troubleshoot.html#test-tools). Next steps - [References](https://docs.qualcomm.com/doc/80-70030-7/topic/references.html#references) Last Published: Jun 15, 2026 [Previous Topic Test and troubleshoot](https://docs.qualcomm.com/bundle/publicresource/80-70030-7/topics/test_troubleshoot.md) [Next Topic References](https://docs.qualcomm.com/bundle/publicresource/80-70030-7/topics/references.md)