# Certification tools

Source: [https://docs.qualcomm.com/doc/80-Y8730-2/topic/certification_tool.html](https://docs.qualcomm.com/doc/80-Y8730-2/topic/certification_tool.html)

The certification tools mentioned in this chapter can control QCC730 to run WFA Certification test cases by translating the Wi-Fi test suite commands to QCC730 shell commands. UART can function as the interface between the Wi-Fi test suite and QCC730. The following sections explain how to use the certification tools.

Note: This feature is available since the QCC730.FR.1.0 Post-CS 4 release.

## Enable certification tools on QCC730

Source: [https://docs.qualcomm.com/doc/80-Y8730-2/topic/certification_tool.html](https://docs.qualcomm.com/doc/80-Y8730-2/topic/certification_tool.html)

Follow these steps to enable the certification tools on QCC730:

1. Set the following configuration in the qccsdk\demo\qcli\_demo\prj.conf file:

        CONFIG_SIGMA_TRAFFIC=yCopy to clipboard
2. Build an image by using the following commands:

        python qccsdk.py set -S=demo/qcli_demo -b=mqm730x 
        python qccsdk.py build --rebuildCopy to clipboard
3. Flash the image to a QCC730 board by using the following commands:

        python qccsdk.py flash --flash --resetCopy to clipboard

## Run QuickTrack tool

Source: [https://docs.qualcomm.com/doc/80-Y8730-2/topic/certification_tool.html](https://docs.qualcomm.com/doc/80-Y8730-2/topic/certification_tool.html)

Use the QuickTrack tool to run WFA QuickTrack test cases.

The QuickTrack tool is in the comp\qtcapy\ directory.

### QuickTrack tool usage example

The following example demonstrates how to use the QuickTrack tool:

    python app.py --ip 192.168.1.77 --port 9004 --interface wlan1 --uart_port com3Copy to clipboard

Table : QuickTrack tool parameters

| Parameter | Description |
| --- | --- |
| `--ip` | Control agent IP address. <br>This is the local IP address of the PC that runs the QuickTrack tool. |
| `--port` | Control agent port.<br><br><br>                                <br>This is the port number used by the QuickTrack tool. |
| `--interface` | DUT interface: wlan1 |
| `--uart_port` | DUT serial port.  For example: com3 |

## Run FlexTrack tool

Source: [https://docs.qualcomm.com/doc/80-Y8730-2/topic/certification_tool.html](https://docs.qualcomm.com/doc/80-Y8730-2/topic/certification_tool.html)

Use the FlexTrack tool to run WFA FlexTrack test cases.

The FlexTrack tool is in the qccsdk\tools\sigma\_dut directory.

### FlexTrack tool usage example

The following example demonstrates how to use the FlexTrack tool:

    python sigma_dut.py -ip 192.168.250.41 -p 9000 -S wlan1 -s com3Copy to clipboard

Table : FlexTrack tool parameters

| Parameter | Description |
| --- | --- |
| `-ip` | Control agent IP address. <br>This is the local IP address of the PC that runs the FlexTrack tool. |
| `-p` | Control agent port.<br><br><br>                                <br>This is the port number used by the FlexTrack tool. |
| `-S` | DUT interface: wlan1 |
| `-s` | DUT serial port.  For example: com3 |

Last Published: Jun 03, 2026

[Previous Topic
AT command](https://docs.qualcomm.com/bundle/publicresource/80-Y8730-2/topics/at_command.md) [Next Topic
Memory dump](https://docs.qualcomm.com/bundle/publicresource/80-Y8730-2/topics/ram_dump.md)