# CLI commands

Source: [https://docs.qualcomm.com/doc/80-58740-4/topic/cli-commands_0.html](https://docs.qualcomm.com/doc/80-58740-4/topic/cli-commands_0.html)

## blemesh\_init

- Command function: blemesh general initialization. This command must be entered
                    before all blemesh cli operations.
- Parameters: None
- Example: Enter the command `blemesh_init`

## blemesh\_pb

- Command function: Set provisioning bearer
- The first parameter indicates the provisioning carrying mode
    - 1: Bearing mode PB-ADV
    - 2: Bearing mode PB-GATT
- The second parameter indicates enable
- Example: Enter the command `blemesh_pb 2 1`

**Parent Topic:** [BLE_MESH](https://docs.qualcomm.com/doc/80-58740-4/topic/ble-mesh.html)

Last Published: Feb 10, 2025

[Previous Topic
BLE\_MESH](https://docs.qualcomm.com/bundle/publicresource/80-58740-4/topics/ble-mesh.md) [Next Topic
Functions](https://docs.qualcomm.com/bundle/publicresource/80-58740-4/topics/functions_0.md)