# Prepare device for shipment

Source: [https://docs.qualcomm.com/doc/80-60631-3/topic/Prepare-device-for-shipment.html](https://docs.qualcomm.com/doc/80-60631-3/topic/Prepare-device-for-shipment.html)

Check the battery status and mount the device for shipment.

Navigate to the **Device/Misc Alerts** section and check the Battery status of your
      device.

If the device needs to be charged, see [Charge the device](https://docs.qualcomm.com/doc/80-60631-3/topic/Getting-started.html#getting-started__charge) .

## Mount the device

When the LED on the device emits a fast-blinking Green and is fully charged, mount the
        device on the top or side of your shipment.

## Read the device

The LED light on the QTS112 device will emit different colors and blink rates based on its
        status.

Contact Qualcomm support at [aware-support@qti.qualcomm.com](mailto:aware-support@qti.qualcomm.com) if the device
        displays an LED error state.

**Parent Topic:** [Getting started](https://docs.qualcomm.com/doc/80-60631-3/topic/Getting-started.html)

Last Published: Apr 17, 2025

[Previous Topic
Create an account](https://docs.qualcomm.com/bundle/publicresource/80-60631-3/topics/Create-an-account.md) [Next Topic
Create a shipment](https://docs.qualcomm.com/bundle/publicresource/80-60631-3/topics/Create-a-new-shipment.md)