# Download and use the prebuilt package Source: [https://docs.qualcomm.com/doc/80-65220-2/topic/download-the-prebuilt-robotics-image_3_1.html](https://docs.qualcomm.com/doc/80-65220-2/topic/download-the-prebuilt-robotics-image_3_1.html) Get an out-of-the-box expreience with the prebuilt robotics package. ## About this task This information provides instructions on how to download and use the robotics prebuilt package, allowing you to quickly get an out-of-the-box experience. The prebuilt package includes: - **Robotics image**: An image based on the Qualcomm Linux release with the ROS core packages added and the QIRP SDK included by default. You can directly use the robotics image to get an out-of-the-box experience. - **QIRP SDK**: Provides not only a runtime installation package with the out-of-the-box experience, but also a cross-compilation toolchain. Using that toolchain, you can quickly develop an application based on the sample code. - **Robotics eSDK**: Provides the Yocto toolchain for building the robotics image. For details, see [Build the robotics image with the prebuilt robotics eSDK](https://docs.qualcomm.com/doc/80-65220-2/topic/build-with-prebuilt-esdk.html). **Prerequisites:** - Enable `SSH` in ‘Permissive’ mode with the steps mentioned in [How to SSH](https://docs.qualcomm.com/bundle/publicresource/topics/80-70014-254/how_to.html#how-to-ssh-). **Steps:** ## Procedure 1. Download the prebuilt package. wget https://artifacts.codelinaro.org/artifactory/qli-ci/flashable-binaries/qirpsdk/qcm6490/x86/qcom-6.6.28-QLI.1.1-Ver.1.1_robotics-product-sdk-1.1.zipCopy to clipboard Note: The QIRP SDK prebuilt package generated on the Arm^®^ host will be supported in the next release. 2. Extract the package with the following command: unzip qcom-6.6.28-QLI.1.1-Ver.1.1_robotics-product-sdk-1.1.zipCopy to clipboard The contents and their respective locations are listed in this table: Table : Contents and locations of prebuilt items | Content type | File or directory name | location | | --- | --- | --- | | Robotics image | `qcom-robotics-full-image` | `/target/qcm6490` | | QIRP SDK | `qirp-sdk_.tar.gz` | ` >/target/qcm6490/qirpsdk_artifacts` | | Robotics eSDK | `qcom-robotics-ros2-humble-x86_64-qcom-robotics-full-image-armv8-2a-qcm6490-toolchain-ext-1.0.sh` | `/target/qcm6490/sdk` | 3. Build a standalone QDL by completing the following steps, which are described in [How to build a standalone QDL](https://docs.qualcomm.com/bundle/publicresource/topics/80-70014-254/how_to.html#how-to-build-a-standalone-qdl-). 1. Install dependent packages. 2. Download and compile the Linux flashing tool (QDL). 4. Force the device to enter EDL mode to enable software flashing with the steps described in [Emergency download (EDL) mode](https://docs.qualcomm.com/bundle/publicresource/topics/80-70014-254/flash_images.html#flash_images__section_vgg_mly_v1c). 5. Flash the robotics image to the device using the generated QDL. Note: The QDL for robotics SDK is generated in a different path. Ensure to use the following command to flash QDL to the device, where `` indicates the root path of the extracted prebuilt package. ./qdl --storage ufs --include /target/qcm6490/qcom-robotics-full-image \ /target/qcm6490/qcom-robotics-full-image/prog_firehose_ddr.elf \ /target/qcm6490/qcom-robotics-full-image/rawprogram*.xml \ /target/qcm6490/qcom-robotics-full-image/patch*.xmlCopy to clipboard 6. Install the prebuilt QIRP SDK to the device. 1. On the host machine, move to the artifacts directory and decompress the package using the `tar` command. cd /target/qcm6490/qirpsdk_artifacts tar -zxf qirp-sdk_.tar.gzCopy to clipboard The `qirp-sdk` directory is generated. 2. To deploy the QIRP artifacts, push the QIRP files to the device using the following commands: cd /target/qcm6490/qirpsdk_artifacts/qirp-sdk scp ./runtime/qirp-sdk.tar.gz root@[ip-addr]:/opt/ ssh root@[ip-addr] (ssh) cd /opt && tar -zxf ./qirp-sdk.tar.gz (ssh) chmod +x /opt/qirp-sdk/*.sh (ssh) cd /opt/qirp-sdk && ./install.shCopy to clipboard You can then develop robotics samples by referring to [Develop a robotic application](https://docs.qualcomm.com/doc/80-65220-2/topic/develop-your-first-application_6.html). **Parent Topic:** [Quick start](https://docs.qualcomm.com/doc/80-65220-2/topic/quick-start_3.html) Last Published: Jul 08, 2024 [Previous Topic Quick start](https://docs.qualcomm.com/bundle/publicresource/80-65220-2/topics/quick-start_3.md) [Next Topic Run robotic samples](https://docs.qualcomm.com/bundle/publicresource/80-65220-2/topics/run-robotic-samples_3_4.md)