# Verify You can determine whether the configured QSH functionalities are operating properly or require attention for any discrepancies using the tools available for verifying these functionalities. You can use the test tool or the QXDM Professional to examine the configured settings and take necessary action. ## Use test tool to display sensor attributes The `ssc_sensor_info` test tool is used to verify the QSH functionality and list down all the supported sensors with their capabilities. ssc_sensor_info Copy to clipboard The following shell output lists all the supported sensors and their attributes: root@qcm6490:~# ssc_sensor_info ssc_sensor_info v1.86 SUID = 0xebd5604d09d379bca54dcf30ec041e0f NAME = ak0991x VENDOR = akm TYPE = mag AVAILABLE = true VERSION = 2.62.47 API = sns_mag.proto RATES = [1.000000, 10.000000, 20.000000, 50.000000, 100.000000] RESOLUTIONS = 0.150000 RANGES = [-4912.000000,4912.000000] DRI = false FIFO_SIZE = 0 STREAM_TYPE = streaming STREAM_SYNC = false DYNAMIC = false EVENT_SIZE = 16 OP_MODES = [LOW_POWER, LOW_NOISE] ACTIVE_CURRENT = 900 SLEEP_CURRENT = 3 HW_ID = 0 RIGID_BODY = display PHYSICAL_SENSOR = true PHYSICAL_SENSOR_TESTS = [3, 1] SELECTED_RESOLUTION = 0.150000 SELECTED_RANGE = [-4912.000000,4912.000000] SUID = 0xaddeaddeaddeaddeaddeaddeaddeadde NAME = da_test VENDOR = QTI TYPE = da_test AVAILABLE = true VERSION = 0.51.0 API = sns_da_test.proto STREAM_TYPE = on_change SUID = 0x69def905fea2fbac6a43ca273221a2eb NAME = aont VENDOR = QTI TYPE = aont AVAILABLE = true VERSION = 0.0.1 API = sns_aont.proto STREAM_TYPE = on_change SUID = 0xabababababababababababababababab NAME = suid VENDOR = QTI TYPE = suid AVAILABLE = true VERSION = 0.0.1 API = sns_suid.proto STREAM_TYPE = single_output SUID = 0xe12754a7007f27595e2541b4701e2275 NAME = registry VENDOR = QTI TYPE = registry AVAILABLE = true VERSION = 0.0.1 API = sns_registry.proto STREAM_TYPE = single_output SUID = 0xadfeadfeadfeadfeadfeadfeadfeadfe NAME = da_test_big_image VENDOR = QTI TYPE = da_test AVAILABLE = true VERSION = 0.49.0 API = sns_da_test.proto STREAM_TYPE = on_change SUID = 0x61ab5376b4a5c9aa58442ede47acd316 NAME = icm4x6xx VENDOR = TDK-Invensense TYPE = accel AVAILABLE = true VERSION = 1.65.2 API = sns_accel.proto RATES = [12.500000, 25.000000, 50.000000, 100.000000, 200.000000, 500.000000] RESOLUTIONS = [0.000019, 0.000037, 0.000075, 0.000150, 0.000299] RANGES = [[-9.806650,9.806650], [-19.613300,19.613300], [-39.226601,39.226601], [-78.453201,78.453201], [-156.906403,156.906403]] DRI = true FIFO_SIZE = 200 STREAM_TYPE = streaming STREAM_SYNC = false DYNAMIC = false EVENT_SIZE = 16 OP_MODES = [LPM, NORMAL, HIGH_PERF] ACTIVE_CURRENT = [50, 240, 240] SLEEP_CURRENT = 6 HW_ID = 0 RIGID_BODY = display PHYSICAL_SENSOR = true PHYSICAL_SENSOR_TESTS = [3, 2, 1] SELECTED_RESOLUTION = 0.000299 Copy to clipboard For troubleshooting common issues, see [Debug](https://docs.qualcomm.com/doc/80-70017-7/topic/debug.html#debug). ## Use QXDM Professional to display sensor logs The following QXDM output shows the verification/confirmation logs for all the supported sensors and their attributes in a low-power processor: Note This feature is currently available only for Authorized users. To upgrade your access, go to: [www.qualcomm.com/support/working-with-qualcomm](https://www.qualcomm.com/support/working-with-qualcomm). [ 123/ 2] MSG 18:47:22.898750 SNS PLATFORM/High [sns_registry_parser.c 2099] REG INIT DONE... ts=63248955 [ 122/ 1] MSG 18:47:22.925000 SNS FRAMEWORK/Medium [ sns_diag_service.c 1072] Sensor registry Vendor:QTI SSID:53 registered with diag [ 122/ 1] MSG 18:47:22.925000 SNS FRAMEWORK/Medium [ sns_sensor.c 769] Populating sensor b2926130 in island: 2, with SUID e12754a7 007f2759 5e2541b4 701e2275 [ 122/ 2] MSG 18:47:22.925000 SNS FRAMEWORK/High [sns_attribute_service.c 584] Sensor : registry, suid_populated : 1, available : 1 [ 122/ 2] MSG 18:47:22.925000 SNS FRAMEWORK/High [sns_attribute_service.c 594] Avail: B2926130 registry [ 123/ 2] MSG 18:47:22.925000 SNS PLATFORM/High [sns_registry_sensor.c 284] Successfully initialized registry [ 122/ 1] MSG 18:47:22.925000 SNS FRAMEWORK/Medium [sns_stream_service.c 150] Created data stream to Sensor 'registry' (b2926130) from Sensor 'suid' (b2922018): b296fd28 [ 122/ 1] MSG 18:47:22.925000 SNS FRAMEWORK/Medium [sns_stream_service.c 686] Add request b296fdc0 on stream b296fd28 (length 20; ID 512) [ 122/ 0] MSG 18:47:22.926250 SNS FRAMEWORK/Low [sns_stream_service.c 548] Process request for Sensor b2926130 on b296fd28 [ 122/ 0] MSG 18:47:22.926250 SNS FRAMEWORK/Low [ sns_suid_sensor.c 1050] send_suid_event dt=registry, default=1 [ 123/ 2] MSG 18:47:22.926250 SNS PLATFORM/High [ sns_q6_pm.c 365] Deregister_client: B2927B30 [ 123/ 2] MSG 18:47:22.926250 SNS PLATFORM/High [sns_registry_sensor.c 366] Processed : SSCRPCD UP Signal [ 122/ 0] MSG 18:47:22.926250 SNS FRAMEWORK/Low [ sns_suid_sensor.c 1050] send_suid_event dt=registry, default=1 [ 122/ 1] MSG 18:47:22.926250 SNS FRAMEWORK/Medium [ sns_data_stream.c 551] sns_data_stream_deinit b29231d0 removing=0 [ 122/ 1] MSG 18:47:22.926250 SNS FRAMEWORK/Medium [sns_stream_service.c 686] Add request b2927b30 on stream b29231d0 (length 0; ID 120) [ 122/ 0] MSG 18:47:22.926250 SNS FRAMEWORK/Low [ sns_suid_sensor.c 1050] send_suid_event dt=registry, default=1 [ 123/ 2] MSG 18:47:22.926250 SNS PLATFORM/High [ sns_gdsc_island.c 109] gdsc_client_cnt(2), sns_gdsc_mode(1) [ 122/ 1] MSG 18:47:22.926250 SNS FRAMEWORK/Medium [sns_stream_service.c 150] Created data stream to Sensor 'timer' (b2118e08) from Sensor 'power_sensor' (b2922c78): b2931c48 [ 122/ 0] MSG 18:47:22.926250 SNS FRAMEWORK/Low [ sns_suid_sensor.c 1050] send_suid_event dt=registry, default=1 [ 122/ 1] MSG 18:47:22.926250 SNS FRAMEWORK/Medium [sns_stream_service.c 686] Add request b2123580 on stream b2931c48 (length 16; ID 512) [ 122/ 0] MSG 18:47:22.926250 SNS FRAMEWORK/Low [sns_stream_service.c 548] Process request for Sensor b2118e08 on b2931c48 [ 122/ 0] MSG 18:47:22.926250 SNS FRAMEWORK/Low [ sns_suid_sensor.c 1050] send_suid_event dt=registry, default=1 Copy to clipboard For more information on an individual sensor level verification, see [Tools](https://docs.qualcomm.com/bundle/publicresource/topics/80-70017-7/test_tools.html). Last Published: Dec 24, 2024 [Previous Topic Calibrate](https://docs.qualcomm.com/bundle/publicresource/80-70017-7/topics/calibrate.md) [Next Topic Platform](https://docs.qualcomm.com/bundle/publicresource/80-70017-7/topics/platform.md)