# Build with QSC-CLI Use the Qualcomm^®^ Software Center command-line interface (QSC-CLI) to download and compile the QIRP SDK and the robotics image, and flash images using tools or commands. **Prerequisites:** - You have installed the QSC CLI, with the commands in [Install QSC-CLI](https://docs.qualcomm.com/bundle/publicresource/topics/80-70018-254/build_frm_source_qsc_cli.html#install-qsc-cli) of *Qualcomm Linux Build Guide*. Note QSC CLI uses Docker. Install Docker on the host computer if you haven't. ## Download **Steps:** 1. Sign in `qpm-cli`. 1. Sign in with this command. qpm-cli --login Copy to clipboard 2. Verify if the `qpm-cli` login is successful. qpm-cli --product-list Copy to clipboard 2. Download a particular software release of the QIRP SDK with the following command. To identify the appropriate values for the command arguments, use the following tables. qsc-cli download --workspace-path '' --product '' --release '' --distribution '' Copy to clipboard Note Both `--release` and `--build` options work individually to download a software package. If both options are provided, the `--release` parameter is used to trigger a download. Table : qsc-cli download parameters | Parameter | Description | QSC-CLI command value | | --- | --- | --- | | `--workspace-path` | Absolute/full workspace path | A custom value | | `--product` | Product ID | Allowed product IDs


QCM6490.LE.1.0
Copy to clipboard


QCS9100.LE.1.0
Copy to clipboard


QCS8300.LE.1.0
Copy to clipboard | | `--release` | Release ID | | | `--build` | Build ID | | | `--distribution` | Distribution | See [Table: Distributions and access levels](https://docs.qualcomm.com/doc/80-70018-265/topic/build-with-qsc-cli_3_1.html#table-distros). | > > > Table : Distributions and access levels > > > | Access level | `Distro` | Yocto layers | > | --- | --- | --- | > | Registered developer with any email address (binaries only, without modem and GPS) | `Qualcomm_Linux.SPF.1.0|TEST|DEVICE|PB_QIRPSDK` | meta-qcom
meta-qcom-hwe
meta-ros
meta-qcom-robotics
meta-qcom-robotics-distro
meta-qcom-robotics-sdk
meta-qcom-qim-product-sdk
Copy to clipboard | > | Registered developer from a verified organization (binaries and selected source for firmware images, without modem and GPS) | `Qualcomm_Linux.SPF.1.0|AP|Standard|OEM|NM_QIRPSDK` | meta-qcom
meta-qcom-hwe
meta-qcom-extras
meta-qcom-robotics-extras
meta-ros
meta-qcom-robotics
meta-qcom-robotics-distro
meta-qcom-robotics-sdk
meta-qcom-qim-product-sdk
Copy to clipboard | Note The build and flash steps follow the [Qualcomm^®^ Linux Build Guide](https://docs.qualcomm.com/bundle/publicresource/topics/80-70018-254). ## Build the QIRP with QSC-CLI downloads To build the QIRP SDK, see [Build default configuration - Compile](https://docs.qualcomm.com/bundle/publicresource/topics/80-70018-254/build_frm_source_qsc_cli.html#compile). **Outputs** Note `` is the argument that you provide to the `--workspace-path` parameter of the [download command](https://docs.qualcomm.com/doc/80-70018-265/topic/build-with-qsc-cli_3_1.html#step-download-with-qsccli). Tab RB3 Gen 2 Vision Development Kit Tab IQ-9075 Evaluation Kit Tab IQ-8 Beta Evaluation Kit - Robotics images: `/DEV/LE.QCROBOTICS.1.0.r1/build-qcs6490-custom/tmp-glibc/deploy/images/qcs6490-rb3gen2-vision-kit/qcom-robotics-full-image/*` - QIRP SDK: `/DEV/LE.QCROBOTICS.1.0.r1/build-qcs6490-custom/tmp-glibc/deploy/qirpsdk_artifacts/qcs6490-rb3gen2-vision-kit/qirp-sdk_.tar.gz` - Robotics images: `/DEV/LE.QCROBOTICS.1.0.r1/build-qcs9075-rb8-core-kit-custom/tmp-glibc/deploy/images/qcs9075-rb8-core-kit/qcom-robotics-full-image/*` - QIRP SDK: `/DEV/LE.QCROBOTICS.1.0.r1/build-qcs9075-rb8-core-kit-custom/tmp-glibc/deploy/qirpsdk_artifacts/qcs9075-rb8-core-kit/qirp-sdk_.tar.gz` - Robotics images: `/DEV/LE.QCROBOTICS.1.0.r1/build-qcs8300-custom/tmp-glibc/deploy/images/qcs8300-ride-sx/qcom-robotics-full-image/*` - QIRP SDK: `/DEV/LE.QCROBOTICS.1.0.r1/build-qcs8300-custom/tmp-glibc/deploy/qirpsdk_artifacts/qcs8300-ride-sx/qirp-sdk_.tar.gz` ## Flash the QIRP to devices Flash the robotics image to the device, and install the QIRP SDK. - To flash the robotics image to the device, see [Flash software images](https://docs.qualcomm.com/bundle/publicresource/topics/80-70018-254/flash_images.html). - To install the QIRP SDK on the device, see [Install the QIRP SDK on the device](https://docs.qualcomm.com/doc/80-70018-265/topic/flash-and-install_4_3.html#install-qirp-sdk). Last Published: Apr 29, 2025 [Previous Topic Build with QSC Launcher](https://docs.qualcomm.com/bundle/publicresource/80-70018-265/topics/build-with-the-qcs-launcher.md) [Next Topic Build with GitHub](https://docs.qualcomm.com/bundle/publicresource/80-70018-265/topics/build-with-github-binaries.md)