# Bring up sensors

## Build and flash an aDSP image

This information is available to licensed users with authorized access. For more
information, see
[Build and flash an aDSP image](https://docs.qualcomm.com/bundle/resource/topics/80-70018-7A/bringup_and_develop.html#build-and-flash-an-adsp-image)
in [Qualcomm Linux Sensors Guide -
Addendum](https://docs.qualcomm.com/bundle/resource/topics/80-70018-7A/overview.html).

Note

[Qualcomm Linux Sensors Guide - Addendum](https://docs.qualcomm.com/bundle/resource/topics/80-70018-7A/overview.html) is accessible only to the licensed users with authorized access.

## Enable sensors on the RB3 Gen 2 Development Kit

For instructions, see [Enable sensors on the RB3 Gen 2 Development Kit](https://docs.qualcomm.com/doc/80-70018-7/topic/platform.html#set-up-sensors).

Next steps

- [Develop sensors](https://docs.qualcomm.com/doc/80-70018-7/topic/develop_sensors.html#develop-sensors)

Last Published: Apr 08, 2025

[Previous Topic
Platform](https://docs.qualcomm.com/bundle/publicresource/80-70018-7/topics/platform.md) [Next Topic
Develop sensors](https://docs.qualcomm.com/bundle/publicresource/80-70018-7/topics/develop_sensors.md)