# Image classification and encode with Neural Processing SDK Source: [https://docs.qualcomm.com/doc/80-70022-50/topic/single-camera-stream-with-image-classification-and-encode-with-mobilenet-v1.html](https://docs.qualcomm.com/doc/80-70022-50/topic/single-camera-stream-with-image-classification-and-encode-with-mobilenet-v1.html) The use cases implement the InceptionV3 image classification model with Qualcomm Neural Processing SDK to classify scenes from a single camera stream and either overlay or compose the classification labels. The streams are then encoded. You can use any publicly available classification model with LiteRT and convert it to `.dlc` format. For instructions, see [TensorFlow Model Conversion](https://docs.qualcomm.com/bundle/publicresource/topics/80-63442-2/model_conv_tensorflow.html). Note: For Ubuntu Server, `sudo` access is necessary to write the encoded stream to the `/etc/media` folder. ## Use qtivoverlay plugin to apply classification overlay Run the use case on the target device: gst-launch-1.0 -e \ qtiqmmfsrc name=camsrc ! video/x-raw,format=NV12_Q08C,width=1280,height=720,framerate=30/1 ! queue ! tee name=split \ split. ! queue ! qtimetamux name=metamux ! queue ! qtivoverlay ! queue ! video/x-raw,format=NV12_Q08C,width=1280,height=720,interlace-mode=progressive,colorimetry=bt601 ! \ v4l2h264enc capture-io-mode=4 output-io-mode=5 ! h264parse ! queue ! mp4mux ! queue ! filesink location=/etc/media/video.mp4 \ split. ! queue ! qtimlvconverter ! queue ! qtimlsnpe delegate=dsp model=/etc/models/inceptionv3.dlc ! queue ! qtimlpostprocess \ settings="{\"confidence\": 40.0}" results=2 module=mobilenet-softmax labels=/etc/labels/classification.json ! text/x-raw ! queue ! metamux.Copy to clipboard To stop the use case, use CTRL + C. The following figure shows the flow of the use case execution: 1. Classify scenes from a video stream coming through a camera source. 2. Overlay the classification labels using overlaylib. 3. Encode this stream as an H.264 bitstream. 4. Multiplex the stream in an MP4 container and store it as an MP4 file. Figure : Pipeline for classification overlay and encode Qualcomm Open source camsrc tee qtimlvconverter qtimetamux qtioverlay v4l2h264enc h264parse mp4mux filesink qtimlsnpe qtimlpostprocess The following table provides the sequential processing stages of the pipeline execution: | Process | Description | | --- | --- | | Source |

  1. The video stream is collected from a camera source plugin
    and two copies are created:


| | **Preprocessing** | **Preprocessing** | | [qtimlvconverter](https://docs.qualcomm.com/doc/80-70022-50/topic/qtimlvconverter.html) |

  1. Receives the video stream on its sink pad.


  2. Performs preprocessing:


  3. Converts the video stream to a tensor stream on its source
    pad.

    The classification model uses this tensor stream
    for inferencing.




| | **Inferencing** | **Inferencing** | | [qtimlsnpe](https://docs.qualcomm.com/doc/80-70022-50/topic/qtimlsnpe.html) |

  1. Loads the model.


  2. Modifies the graph for the chosen delegate.


  3. Receives the tensor stream on its sinkpad.


  4. Runs the inference and produces a tensor stream with the
    inference results on its source pad.


| | **Postprocessing** | **Postprocessing** | | qtimlpostprocess |

  1. Receives the inference tensors from a classification model
    on its sinkpad.


  2. Converts the tensors into formats such as video or text that
    the multimedia plugins can process later.


  3. Applies the threshold to the chosen number of results.


  4. Loads the corresponding modules of the classification
    models.

    In this use case, qtimlpostprocess does the
    following:


    1. Loads the submodule of the model.


    2. Produces results as video frames with classification
      labels.


    3. Sends them to the sinkpad of qtimetamux.





| | [qtimetamux](https://docs.qualcomm.com/doc/80-70022-50/topic/qtimetamux.html) |

  1. Receives the video and text streams with the classification
    results corresponding to the video stream on its
    sinkpads.


  2. Produces GST buffers with the contents of the video stream
    on its sink pad.


  3. Adds classification result from the data sinkpad to GST
    buffer meta (meta muxing) on its source pad.


| | [qtivoverlay](https://docs.qualcomm.com/doc/80-70022-50/topic/qtioverlay.html) |

  1. Receives the multiplexed stream.


  2. Overlays the classification labels on the VideoFrame using
    CL.


  3. Produces GST buffers with overlays in its source pad.


| | [v4l2h264enc](https://docs.qualcomm.com/doc/80-70022-50/topic/v4l2h264enc.html) |

  1. Applies parameters to each frame of the video stream it's
    receiving on its sinkpad.


  2. Encodes it into bitstream and sends it over its
    sourcepad.


| | h264parse | Adds more information about the bitstream to GStreamer buffer
meta. | | mp4mux | Receives these buffers and creates containers with format
specification buffers. | | **Output** | **Output** | | Filesink | Stores the resulting stream in a
/etc/media/video.mp4 file. | | Playback | Pull video.mp4 from the host computer and
play it on a media player:
`scp root@ target device>:/etc/media/video.mp4 directory>` | ## Use qtivcomposer to mix original frame with classification mask Run the use case on the target device: gst-launch-1.0 -e --gst-debug=2 \ qtiqmmfsrc name=camsrc ! video/x-raw,format=NV12_Q08C,width=1280,height=720,framerate=30/1 ! queue ! tee name=split \ split. ! queue ! qtivcomposer name=mixer sink_1::position="<30, 30>" sink_1::dimensions="<320, 180>" ! queue ! video/x-raw,format=NV12,width=1920,height=1080,interlace-mode=progressive,colorimetry=bt601 ! \ v4l2h264enc capture-io-mode=4 output-io-mode=5 ! h264parse ! queue ! mp4mux ! queue ! filesink location=/etc/media/video.mp4 \ split. ! queue ! qtimlvconverter ! queue ! qtimlsnpe delegate=dsp model=/etc/models/inceptionv3.dlc ! queue ! qtimlpostprocess settings="{\"confidence\": 40.0}" \ results=2 module=mobilenet-softmax labels=/etc/labels/classification.json ! video/x-raw,format=BGRA,width=640,height=360 ! queue ! mixer.Copy to clipboard To stop the use case, use CTRL + C. The following figure shows the flow of the use case execution: - Classify scenes from a video stream coming through a camera source. - Compose classification labels and video stream together using qtivcomposer. - Encode this stream as an H.264 bitstream. - Multiplex the stream in an MP4 container and store it as an MP4 file. Figure : Pipeline for classification and encode with qtivcomposer Qualcomm Open source camsrc tee qtimlvconverter qtivcomposer v4l2h264enc h264parse mp4mux filesink qtimlsnpe qtimlpostprocess The following table provides the sequential processing stages of the pipeline execution: | Process | Description | | --- | --- | | Source |

  1. The video stream is collected from a camera source plugin
    and two copies are created:

    • One stream is sent to the qtivcomposer plugin to
      retain the video stream.


    • The other stream is sent to an ML inferencing
      pipeline.





| | **Preprocessing** | **Preprocessing** | | [qtimlvconverter](https://docs.qualcomm.com/doc/80-70022-50/topic/qtimlvconverter.html) |

  1. Receives the video stream on its sink pad.


  2. Performs preprocessing:

    • Color conversion


    • Scaling down/up


    • Normalization on the stream data when the model
      expects the floating point values as input





  3. Converts the video stream to a tensor stream on its source
    pad.

    The classification model uses this tensor stream
    for inferencing.




| | **Inferencing** | **Inferencing** | | [qtimlsnpe](https://docs.qualcomm.com/doc/80-70022-50/topic/qtimlsnpe.html) |

  1. Loads the model.


  2. Modifies the graph for the chosen delegate.


  3. Receives the tensor stream on its sinkpad.


  4. Runs the inference and produces a tensor stream with the
    inference results on its source pad.


| | **Postprocessing** | **Postprocessing** | | qtimlpostprocess |

  1. Receives the inference tensors from a classification model
    on its sinkpad.


  2. Converts the tensors into formats such as video or text that
    the multimedia plugins can process later.


  3. Applies the threshold to the chosen number of results.


  4. Loads the corresponding modules of the classification
    models.

    In this use case, qtimlpostprocess does the
    following:


    1. Loads the submodule of the model.


    2. Produces results as video frames with classification
      labels.


    3. Sends them to the sinkpad of qtivcomposer.





| | [qtivcomposer](https://docs.qualcomm.com/doc/80-70022-50/topic/qtivcomposer.html) |

  1. Receives original video stream and video stream with
    classification results on its sinkpads.


  2. On its sourcepad, produces GST buffers with the contents
    composed of video streams from its sinkpads.


| | [v4l2h264enc](https://docs.qualcomm.com/doc/80-70022-50/topic/v4l2h264enc.html) |

  1. Applies parameters to each frame of the video stream it's
    receiving on its sinkpad.


  2. Encodes it into bitstream and sends it over its
    sourcepad.


| | h264parse | Adds more information about the bitstream to GStreamer buffer
meta. | | mp4mux | Receives these buffers and creates containers with format
specification buffers. | | **Output** | **Output** | | Filesink | Stores the resulting stream in a
/etc/media/video.mp4 file. | | Playback | Pull video.mp4 from the host computer and
play it on a media player:
`scp root@ target device>:/etc/media/video.mp4 directory>` | **Parent Topic:** [Qualcomm Neural Processing SDK use cases](https://docs.qualcomm.com/doc/80-70022-50/topic/qualcomm-neural-processing-sdk-use-cases.html) Last Published: Feb 20, 2026 [Previous Topic Image classification and display with Neural Processing SDK](https://docs.qualcomm.com/bundle/publicresource/80-70022-50/topics/single-camera-stream-with-image-classification-and-display-with-mobilenet-v1.md) [Next Topic Object detection and display with Neural Processing SDK](https://docs.qualcomm.com/bundle/publicresource/80-70022-50/topics/single-camera-stream-with-object-detection-and-display-with-mobilenet-v2-ssd.md)