# Object detection and encode with Neural Processing SDK Source: [https://docs.qualcomm.com/doc/80-80020-50/topic/single-camera-stream-with-object-detection-and-encode-with-mobilenet-v2-ssd.html](https://docs.qualcomm.com/doc/80-80020-50/topic/single-camera-stream-with-object-detection-and-encode-with-mobilenet-v2-ssd.html) The use cases implement a yolox.dlc object detection model with Qualcomm Neural Processing SDK to identify an object from a camera stream. The use case is to overlay or compose the bounding boxes over the detected objects, and then encode the stream as a H.264 bitstream. Download [YOLOX](https://aihub.qualcomm.com/iot/models/yolox?searchTerm=yolox%29) Qualcomm AI runtime w8a8 precision model from AI hub. The YOLOX model uses the YOLOv8 postprocessing module. Note: For Ubuntu Server, `sudo` access is necessary to write the encoded stream to the `/etc/media` folder. ## Use qtivoverlay plugin to apply detection overlay Run the use case on the target device: gst-launch-1.0 -e \ filesrc location=/etc/media/video.mp4 ! qtdemux ! h264parse ! v4l2h264dec capture-io-mode=4 output-io-mode=4qtiqmmfsrc name=camsrc ! video/x-raw,format=NV12_Q08C,width=1280,height=720,framerate=30/1 ! queue ! tee name=split \ split. ! queue ! qtimetamux name=metamux ! queue ! qtivoverlay ! queue ! v4l2h264enc capture-io-mode=4 output-io-mode=5 ! h264parse ! queue ! mp4mux ! queue ! filesink location=/etc/media/video.mp4 \ split. ! queue ! qtimlvconverter ! queue ! qtimlsnpe delegate=dsp model=/etc/models/yolox-yolo-x-w8a8.dlc tensors="" ! queue ! \ qtimlpostprocess settings="{\"confidence\": 70.0}" results=5 module=yolov8 labels=/etc/labels/yolox.json ! text/x-raw ! queue ! metamux.Copy to clipboard To stop the use case, use CTRL + C. The following figure shows the flow of the use case execution: 1. Identify object scenes from a video stream, which is coming through a file source. 2. Overlay bounding boxes over the detected objects using overlaylib. 3. Encode this stream as an H.264 bitstream. 4. Multiplex the stream in an MP4 container and stored as an MP4 file. Figure : Pipeline for bounding box overlay and encode The following table provides the sequential processing stages of the pipeline execution: | Process | Description | | --- | --- | | File source: filesrc |

Captures the video stream using filesrc, followed by
qtdemux, which demultiplexes the stream.

Uses tee to split the stream for inferencing.

Receives the video stream on its sink pad.

Performs preprocessing:
- Color conversion
- Scaling down/up
- Normalization on the stream data when the model
  expects the floating point values as input

Converts the video stream to a tensor stream on its source
pad.
The object detection model uses this tensor
stream for inferencing.

Loads the object detection model.

Modifies the graph for the chosen delegate.

Receives the tensor stream on its sinkpad.

Runs the inference and produces a tensor stream with the
object detection results on its source pad.

Receives the inference tensors from the object detection
model.

Converts the inference tensors on its sinkpad into formats
like video or text that the multimedia plugins can process
later.

Applies the threshold to the chosen number of results.

Loads the corresponding modules for detection models.
In
this use case, qtimlpostprocess does the following:
1. Loads the YOLOv8 submodule.
2. Produces results as structures of text.
3. Sends them to the sinkpad of qtimetamux.

| | [qtimetamux](https://docs.qualcomm.com/doc/80-80020-50/topic/qtimetamux.html) |

Receives video stream and text stream with the bounding box
results corresponding to the video stream on its
sinkpads.

Produces GST buffers with the contents of the video stream
from its sink pad.

Adds the bounding boxes as
GstVideoRegionOfInterest from data
sinkpad to GST buffers meta (meta muxing) on its source
pad.

| | [qtivoverlay](https://docs.qualcomm.com/doc/80-80020-50/topic/qtioverlay.html) |

Receives the multiplexed stream.

Overlays the bounding boxes on the VideoFrame using CL.

Produces GST buffers with overlays in its source pad.

| | [v4l2h264enc](https://docs.qualcomm.com/doc/80-80020-50/topic/v4l2h264enc.html) |

Applies parameters to each frame of the video stream it's
receiving on its sinkpad.

Encodes it into bitstream and sends it over its
sourcepad.

| | h264parse | Adds more information about the bitstream to the GStreamer buffer
meta. | | mp4mux | Receives these buffers and creates containers with format
specification buffers. | | **Output** | **Output** | | Filesink | Stores the resulting stream in a
/etc/media/video.mp4 file. | | Playback | Pull video.mp4 from the host computer and
play it on a media player:
`scp root@ target device>:/etc/media/video.mp4 directory>` | ## Use qtivcomposer to mix original frame with detection mask Run the use case on the target device: gst-launch-1.0 -e \ filesrc location=/etc/media/video.mp4 ! qtdemux ! h264parse ! v4l2h264dec capture-io-mode=4 output-io-mode=4qtiqmmfsrc name=camsrc ! video/x-raw,format=NV12_Q08C,width=1280,height=720,framerate=30/1 ! queue ! tee name=split \ split. ! queue ! qtivcomposer name=mixer ! queue ! video/x-raw,format=NV12,width=1920,height=1080,interlace-mode=progressive,colorimetry=bt601 ! \ v4l2h264enc capture-io-mode=4 output-io-mode=5 ! h264parse ! queue ! mp4mux ! queue ! filesink location=/etc/media/video.mp4 \ split. ! queue ! qtimlvconverter ! queue ! qtimlsnpe delegate=dsp model=/etc/ models/yolox-yolo-x-w8a8.dlc tensors="" ! queue ! \ qtimlpostprocess settings="{\"confidence\": 70.0}" results=5 module=yolov8 labels=/etc/labels/yolox.json ! video/x-raw,width=640,height=360 ! queue ! mixer.Copy to clipboard To stop the use case, use CTRL + C. The following figure shows the flow of the use case execution: 1. Identify object scenes from a video stream, which is coming through a file source. 2. Compose bounding boxes over objects detected and original video stream using qtivcomposer. 3. Encode this stream as an H.264 bitstream. 4. Multiplex the stream in an MP4 container and stored as an MP4 file. Figure : Pipeline for bounding box mask and encode with qtivcomposer The following table provides the sequential processing stages of the pipeline execution: | Process | Description | | --- | --- | | File source: filesrc |

Captures the video stream using filesrc, followed by
qtdemux, which demultiplexes the stream.

Uses tee to split the stream for inferencing.

Receives the video stream on its sink pad.

Performs preprocessing:
- Color conversion
- Scaling down/up
- Normalization on the stream data when the model
  expects the floating point values as input

Converts the video stream to a tensor stream on its source
pad.
The object detection model uses this tensor
stream for inferencing.

Loads the object detection model.

Modifies the graph for the chosen delegate.

Receives the tensor stream on its sinkpad.

Runs the inference and produces tensor stream with the
object detection results on its source pad.

| | **Postprocessing** | **Postprocessing** | | [qtimlpostprocess](https://docs.qualcomm.com/doc/80-80020-50/topic/qtimlpostprocess.html) |

Receives the inference tensors from the object detection
model.

Converts the inference tensors on its sinkpad into formats
like video or text that the multimedia plugins can process
later.

Applies the threshold to the chosen number of results.

Loads the corresponding modules for detection models.
In
this use case, qtimlpostprocess does the following:
1. Loads the YOLOv8 submodule.
2. Produces video frames with only bounding boxes that
  can be overlaid on objects.
3. Sends them to sinkpad of qtivcomposer.

| | [qtivcomposer](https://docs.qualcomm.com/doc/80-80020-50/topic/qtivcomposer.html) |

Receives the original video stream and video stream with
bounding boxes on its sinkpads

On its sourcepads, produces content that's composed of the
video streams processed from its sinkpads.

| | [v4l2h264enc](https://docs.qualcomm.com/doc/80-80020-50/topic/v4l2h264enc.html) |

Applies parameters to each frame of the video stream its
receiving on its sinkpad.

Encodes it into bitstream and sends it over its
sourcepad.