# Verify audio paths

Source: [https://docs.qualcomm.com/doc/80-88500-3/topic/21_Verify_audio_paths.html](https://docs.qualcomm.com/doc/80-88500-3/topic/21_Verify_audio_paths.html)

Ensure that the following conditions are met in the SoundWire interface:

- SoundWire clocks are running at the correct frequencies
- Data line contains data
- Master clock (MCLK) is running at the configured frequency

- **[Playback over WSA stereo speaker](https://docs.qualcomm.com/doc/80-88500-3/topic/22_Playback_over_WSA_stereo_speaker.html)**
- **[Record through primary MIC (digital MIC)](https://docs.qualcomm.com/doc/80-88500-3/topic/23_Record_through_primary_MIC__digital_MIC_.html)**

**Parent Topic:** [Configure audio settings](https://docs.qualcomm.com/doc/80-88500-3/topic/18_Configure_audio_settings.html)

Last Published: Sep 26, 2023

[Previous Topic
Verify codec registration](https://docs.qualcomm.com/bundle/publicresource/80-88500-3/topics/20_Verify_codec_registration.md) [Next Topic
Playback over WSA stereo speaker](https://docs.qualcomm.com/bundle/publicresource/80-88500-3/topics/22_Playback_over_WSA_stereo_speaker.md)