# Sensors control and interrupt GPIOs

Source: [https://docs.qualcomm.com/doc/80-88500-4/topic/sensors_control_and_interrupt_gpios.html](https://docs.qualcomm.com/doc/80-88500-4/topic/sensors_control_and_interrupt_gpios.html)

GPIO\_112 and GPIO\_113 are used for Accelerometer and Gyroscope interrupts
        respectively.

Note: Any available GPIO (MPM wakeable) can be routed as an interrupt to the sensor core
            subsystem.

| GPIO | Pin name on SoM | Use on the reference platform |
| --- | --- | --- |
| GPIO\_112 | ACCEL\_INT | Accelerometer/Gyroscope interrupt |
| GPIO\_113 | GYRO\_INT | Accelerometer/Gyroscope interrupt |
| GPIO\_64 | N/A\* | Not used<br><br><br>                            <br>(Reserved for sensor interrupt) |
| GPIO\_121 | N/A\* | Not used<br><br><br>                            <br>(Reserved for sensor interrupt) |
| GPIO\_122 | MAG\_INT | Not used<br><br><br>                            <br>(Reserved for sensor interrupt) |
| GPIO\_123 | MAG\_DRDY\_INT | Not used<br><br><br>                            <br>(Reserved for sensor interrupt) |
| GPIO\_129 | PS\_INT | Not used<br><br><br>                            <br>(Reserved for sensor interrupt) |
|  |  |  |
|  |  |  |
|  |  |  |
|  |  |  |

Note: \*On the SoM, if there is no pinout for GPIO\_64 and GPIO\_121, you
            can still use them on the custom boards.

**Parent Topic:** [Sensors](https://docs.qualcomm.com/doc/80-88500-4/topic/142_Sensors.html)

Last Published: Aug 18, 2023

[Previous Topic
Sensor usage](https://docs.qualcomm.com/bundle/publicresource/80-88500-4/topics/sensor_usage.md) [Next Topic
Artificial intelligence/Machine learning](https://docs.qualcomm.com/bundle/publicresource/80-88500-4/topics/143_AI_ML.md)