# Hardware overview QCC730 is a micropower Wi-Fi transceiver single-package wireless local area network (WLAN) solution that supports dual-band 1 x 1 IEEE 802.11a/b/g/n WLAN standards. The following figure shows the QCC730M EVK. Power LED Power LED Wake up Wake up Reset Reset USB-C UART USB-C UART 10-pin Cortex debug connector (0.05") JTAG 10-pin Cortex debug connector (0.05") JTAG Power measurement (3.3 V, Vbatt) Power measurement (3.3 V, Vbatt) QCC730M micro-power Wi-Fi module QCC730M micro-power Wi-Fi module Power measurement (1.8 V, internal PA) Power measurement (1.8 V, internal PA) J3: 2-pin header jumper J3: 2-pin header jumper J4: 2-pin header jumper J4: 2-pin header jumper J8: 2-pin header jumper J8: 2-pin header jumper **Figure: QCC730M EVK** Last Published: Jun 16, 2026 [Previous Topic Introduction](https://docs.qualcomm.com/bundle/publicresource/80-Y8730-251/topics/intro.md) [Next Topic Set up the development environment](https://docs.qualcomm.com/bundle/publicresource/80-Y8730-251/topics/environment_setup.md)